The Zip Aquapoint III Unvented water heater is a WRAS approved and CE endorsed water heater. It is multipoint, wall mounted over sink water heater, available in 30, 50, 80, and 100-liter capacity to deliver single or multiple hot water spouts, it doesn’t need any special taps or valves, it can be used with conventional taps or mixers. The Zip Aquapoint uses a sacrificial anode for protection against corrosion, it contains a glass-lined steel storage tank which rated pressure is tested to 13 bar and its external temperature is controlled with frost protection. Zip Aquapoint unvented water heaters are a popular choice of supplying hot water within the domestic or commercial environment both. It is supplied with all the taps or mixers, so you don’t need any additional accessories. This water heater is completely safe and leak-proof, so it is relevant to fit any location such as in a roof space, kitchen cupboard, or any hidden places.
Features
- It is unvented over sink hot water heater
- Available in 30, 50, 80 100 liters
- This Water Heater is suitable for one or multiple water outlets
- It contains a neon indicator, which shows that water heater is in running mode
- The frost protection features of this water heater control external temperature
- Conventional taps or mixers are also used in it
- Foam insulation provides high performance
- Sacrificial anode for adding protection for component and the water tank in aggressive conditions, it requires regular inspection and replacement when it is needed.
- The zip water heater is supplied with installation kit and all the taps and valves
Pressure Control Supplied
- Pressure and temperature relief valve: set to 7 bar and 90C resp.
- Pressure and temperature relief valve, set to 6 bar
- Pressure reducing valve and line strainer, set to 3.5 bar
- The external expansion vessel pre-charged, set to 3.5 bar
Technical Terms and Features
- Zip Aquapoint is unvented, over the sink and multipoint water heater
- Its outer part is made of corrosion-resistant white plastic, which makes it sturdy and durable
- The water tank which is used in it is 1.8mm glass enameled
- Heating element 3.0 kW
- It is fitted with a sacrificial anode which also provides corrosion protection
- The adjustable thermostat has a range of 25 to 75 degree Celsius
- Automatic Resettable over-temperature safety cut out
- Neon Element “ON” indicator
- BSP water connections
- Available in 4 capacity options such as 30, 50, 80 and 100 liters
- It is rated to 3.0 kW
- Its heating element is an embedded rod type, so whenever a replacement is required, it can be replaced without draining of water
- It has a thermostat capillary type, adjustable up to 25C to 75C
- Zip Aquapoint has an insulation high density and it is also free from CFC polyurethane foam
Safety Measures
- In intrusive water conditions, sacrificial anode provides protection for elements and tanks against corrosion. However it must be confirmed on an interval of 6 months regularly, and if gradual erosion occurs, the anode should be replaced with a new one. In most of the cases, the harshness of local water can cause rapid erosion of the anode resulting in particles being deposited as a residue
- It has a manual resettable over-temperature safety cut outset to -5C / 84C+
- Frost protection formula whilst device is in running mode
- Expansion relief valve (supplied) set at 6 bar
- Comes with a 1-year warranty
Installation
Zip Aquapoint is designed as a wall-mounted over the sink water heater. The installation process is easy and supplied with installation kit, valve, and mixers, don’t need any additional accessories. It can be installed on your roof, your kitchen cupboard, or any hidden places. Its pressure and temperature relief valve are required for fitted plumbing. Installation must comply with current IEE regulations.
0 Comments